Header - 29.125" x 3.00" 2.00" Connection located 3.50" from end of tank
FDPS00030ST
Header - 29.125" x 3.00" 2.00" Connection located 6.00" from edge of tank
Bottom Tank
FDPS06800ST
Steel
Header: 31.25" x 6.00" 52 Bolt Holes Ford Cross Flow Tank
Tank tapers in depth from top to bottom. No fittings or openings
FDPS06810ST
Steel
Header: 36.75" x 5.50" 48 Bolt Holes Ford Cross Flow Tank
One 2.50 " O.D. hose connection 2 - 1/2 " N.P.T. fittings 2 -5/16 " N.C. threads on the bottom at 2.00 " centers
FDPS06850ST
Steel
Header: 31.25" x 6.00" 40 Bolt HolesFord Bottom Tank
One 2.25 " O.D. hose connection on 90 degree bend out of the bottom of the tank One bolt-on type connections with two 5/16 " N.C. threaded holes One 1/4 " N.P.T. fitting on top of hose connection
FDPS06870ST
Steel
Header: 37.00" x 5.50" 48 Bolt Holes Ford Bottom Tank
One 3.25 " O.D. , 60 degree, pipe connection on slight angle facing up 1/8 " N.P.T. fitting
FDPS06880ST
Steel
Header: 33.12" x 6.50" 47 Bolt HolesFord Bottom Tank
One 2.25 " O.D. hose connection on passenger side 1 bolt-on type flange with two 5/16 " N.C. threaded holes (for shutter) on front driver side 1/4 " N.P.T. fitting.
FDPS06900ST
Steel
Length: 38.50" Top Flange: 9.50" x 4.75" Bottom Flange: 6.50" x 4.75" Ford Side Frame
Side Frame Top flange has 11 bolt holes 5 tapped 5/16 " N.C. 6 drilled clearance for 5/16 " bolts. Bottom flange has 10 holes, 3 are tapped 5/16 " N.C. and 7 drilled to clear 5/16 " bolts One bracket 22.00 " from top flange. NOTE: Frames are not interchangeable. Order left for driver side or right for passenger side or pairs
FDPS06930ST
Steel
Length: 48.06" Top Flange: 8.87" Bottom Flange: 5.50" Ford Side Frame
Side Frame Top Flange has 7 holes tapped 5/16 " N.C. Bottom flange has 5 holes tapped 5/16 " N.C. One mounting pin, 15/16 " in diameter x 1.62 " long, located 5.56 " up from bottom flange. NOTE: Frames are not interchangeable. Order left for driver side or right for passenger side or pairs
FDPS06940ST
Steel
Header: 37.00" x 5.50" 48 Bolt Holes (Overall - 37.00" x 9.00" 52 Bolt Holes) Ford Top Tank
Nineteen 5/16 " N.C. threaded holes in built-in baffle One 2.50 " O.D. pipe on a 45 degree angle One 1/2 " N.P.T. fitting on side of 2.50 " O.D. pipe One 1.00 " hose connection One 3/8 " and two 1/4 " N.P.T. fittings One 1.25 " hole on top for filler neck.
FDPS06960ST
Steel
Header: 31.25" x 10.25" 56 Bolt Holes Ford Cross Flow Tank
This filler tank has a 1/4 " a 3/4 " and a 1.25 " NPT flange, a flange for a sight glass, and a flange near the top of the tank facing the engine with a copper pipe running inside and connected to special drain fitting on bottom. This tank has a built in baffle
FDPS06970ST
Steel
Header: 31.25" x 10.25" 56 Bolt Holes Ford Cross Flow Tank
Filler Tank . Two 1/2 ", one 3/4 " and one 1.25 " N.P.T. fittings One fitting for sight glass One bolton type flange on front One fitting near top of tank, facing engine, with copper pipe running inside and connected to special drain fitting on bottom One 1.25 " hole on top for filler neck One box cutout in built-in baffle
FDPS06980ST
Steel
Cross Bars
7/16 " round bar 46.50 " long. Threaded for 1.50 " with 7/16 " N.C. thread on each end One flattened spot 27.50 " from one end. For use with #FD698 top and bottom frames
FDPS06990ST
Steel
Header: 36.75" x 9.25" 52 Bolt Holes Ford Cross Flow Tank
Built in baffle has three 5/16 " N.C. threaded holes One 1.00 " O.D. hose connection near bottom straight out 2.00 " long One drain fitting next to 1.00 " hose connnection Two 1/2 " N.P.T. fittings facing engine One fitting for sight glass near top Two 5/16 " N.C. threaded holes on top of tank One 1.25 " hole for filler neck
FDPS26940ST
Steel
Header : 26.50" x 3.25"Ford Solder on Tank
2.00 " diameter hose connections, and a 1/4 " NPT flange for a drain/expansion fitting. Bus & Motor Home
FDPS60940ST
Steel
Header: 37.00" x 5.50" 48 Bolt Holes (37.00" x 9.00" - 52 Bolt Holes Overall) Ford Top Tank
Nineteen 5/16 " N.C. threaded holes in built-in baffle Two 2.50 " O.D. pipe on a 45 degree angle One 1/2 " N.P.T. fitting on side of 2.50 " O.D. pipe One 1.00 " hose connection One 3/8 " and two 1/4 " N.P.T. fittings One 1.25 " hole on top for filler neck
FDPS60980ST
Steel
Length: 43.12" Small Flange: 5.50" x 7.00" Large Flange: 9.25" x 7.00" Ford Side Frame
Top Frame Small flange has 11 holes, 4 tapped 5/16 " N.C. and 7 drilled clearance for 5/16 " bolts Large flange has 13 holes, 6 tapped 5/16 " N.C. and 7 drilled clearance for 5/16 " bolts Large flange also has an elongated hole 1.00 " x 1.75 " Back of frame has 4 holes tapped 5/16 " N.C Various other holes for brackets and cross bars etc
FDPS68000ST
Steel
Header: 31.25" x 6.00" 52 Bolt Holes Ford Cross Flow Tank
This tank has a 2.50 " diameter hose connection 2 - 1/2 " NPT flanges Corner of the header is cut off at a 45 degree angle Note: the two 1/2 " NPT fittings are optional. They are welded on all model #FD 680 tanks but are not drilled through. Check against original tank to see if either one is needed
FDPS68010ST
Steel
Header: 36.75" x 5.50" 48 Bolt Holes Ford Cross Flow Tank
Low Flow driver side tank Blank tank has two 5/16 " N.C. threaded holes
FDPS68110ST
Steel
Header: 36.75" x 5.50" 48 Bolt Holes Ford Cross Flow Tank
Low flow tank with one 1.00 " O.D. hose connection 2 - 5/16 " N.C. threaded holes in tank
FDPS68710ST
Steel
Header: 37.00" x 5.50" 48 Bolt Holes Ford Bottom Tank
One 3.50 " O.D. hose connection straight out the bottom and turns on approximately 45 degree angle upwards 1/8 " N.P.T. fitting
FDPS68720ST
Steel
Header: 37.00" x 5.50" 48 Bolt Holes Ford Bottom Tank
One 1.00 " and one 1.25 " hose connection 2 - 1/4 " NPT fittings One baffle in the center of the tank
FDPS69100ST
Steel
Length: 37.87" Small Flange: 6.00" x 6.12" Large Flange: 10.37" x 6.12" Ford Side Frame
Bottom Frame Small flange has 13 bolt holes, three holes tapped 5/16 " N.C. and ten holes drilled clearance for 5/16 " bolts Large flange has 15 bolt holes, five holes tapped for 5/16 " N.C. and ten holes drilled clearance for 5/16 " bolts. Two mounting studs at 30.50 " centers. Various other holes for brackets, etc
FDPS69120ST
Steel
Ford Cross Bars
Two 3/8 " round bars 47.00 " long, with approximately 1.25 " of thread on each end Bars have a 2.50 " long flat area in the center For use with #FD691 #FD692 rails
FDPS69220ST
Steel
Length: 7.42" Small Flange: 6.00" x 6.12" Large Flange: 10.37" x 6.12" Ford Side Frame
Top Frame Small flange has 13 bolt holes, five tapped 5/16 " N.C. and eight drilled to clear 5/16 " bolts Large flange has 15 bolt holes, seven tapped 5/16 " N.C. and eight drilled clearance for 5/16 " bolts One bracket in centre of frame with a 1 1/4 " hole Matches model #FD691 bottom frame
FDPS69400ST
Steel
Header : 26.50" x 3.25"Ford Solder on Tank
2.00 " diameter hose connections, and a 1/4 " NPT flange for a drain/expansion fitting. Bus & Motor Home
FDPS69800ST
Steel
Length: 43.12" Small Flange: 5.50" x 7.00" Large Flange: 9.00" x 7.00" Ford Side Frame
Bottom Frame Small flange has 11 holes, 5 tapped 5/16 " N.C. threads and 6 drilled clearance for 5/16 " bolts Large flange is L shaped with 10 holes, 7 tapped 5/16 " N.C. threads and 3 drilled clearance for 5/16 " bolts Two tapered mounts at 6 " centres with 3/4 " N.C. threaded nuts Two 7/16 " N.C. nuts welded on side for cross bars Frame is deep and narrow
FDPS69820ST
Steel
Header: 31.25" x 10.25" 56 Bolt Holes Ford Cross Flow Tank
Filler Tank One 1/4 ", one 3/4 " and 1.25 " N.P.T. fitting One fitting for sight glass One fitting near top of tank, facing engine, with copper pipe running inside and connected to special drain fitting on bottom One 1.25 " hole on top for filler neck Five 5/16 " N.C. threaded holes in built-in baffle One vertical baffle to split tank top to bottom
FDPS69900ST
Steel
Header: 36.75" x 9.25" 52 Bolt Holes Ford Cross Flow Tank
Low Flow tank Built-in baffle has five 5/16 " N.C. threaded holes and a separating baffle 18.31 " from bottom to centre One 1.00 " O.D. hose connection on approximately a 70 degree angle facing up One fitting next to 1.00 " hose connection One 1/2 ", one 1/4 " N.P.T. fitting Two 5/16 " N.C. threaded holes on top of tank One 1.25 " diameter hole on sloped top for filler neck