Top Bottom Flanges each have 12 hole, 2 tapped 5/16 " NC threaded and 10 drilled clearance for 5/16 " bolts. Engine side of rail is flush with flange with seven 1/4 " NC threaded holes on side.. Two brackets on side - One for CAC and one for mounting pin. NOTE: Frames are not interchangeable.

This tank has two bolt-on type flanges with two 7/16 " NC threads in each, a 1.75 " hole for a filler neck, a 1/2 " NPT flange between the two bolt-on flanges, and a 1/8 " and three 1/4 " NPT flanges. This tank has a built-in baffle.

Two bolt-on type flanges with two 7/16 " N.C. threads in each. One 1/8 ", one 3/4 " and two 1/4 " N.P.T. fittings. One 1.75 " hole on top for filler neck

This tank is the same as tank #PB 700, except the header flange is wider

Two bolt-on type flanges with two 7/16 " N.C. threads in each. One 1/8 ", two 1/4 " and one 3/4 " N.P.T. fitting. One 1.75 " hole on top for filler neck.

Two bolt-on type flanges with two 7/16 " N.C. threads in each. One 1/2 " N.P.T. fitting between flanges. One 1/8 " and three 1/4 " N.P.T. fittings. One 1.75 " hole on top for filler neck. Built-in baffle. NOTE: Can be made to accommodate C.A.C.

Two bolt-on type flanges with two 7/16 " N.C. threaded holes in each. Two 1/4 ", two 3/8 " and one 1/8 " N.P.T. fittings. One 3/4 " N.P.T. fitting on passenger

The top part of the tank is 7.25 " from the edge of the header on each side. There is a 2.50 " diameter hose connection, a 1.00 " diameter hose connection, a 3/8 " diameter hose connection, a 1/4 " NPT flange, three 5/16 " NC threaded nuts in the tank, and a 1.25 " hole on top for filler neck.

This tank has two bolt-on type connections with two 3/8 " NC threaded holes in each, five 3/8 " NPT flanges and one 3/4 " NPT flange facing the engine, a 1.75 " diameter hole on top for filler neck, a 3/8 " NC threaded hole on top next to the filler neck, three 1/4 " NC threaded holes in the tank on the front overhang, and two 1/4 " NC threaded nuts welded on the header on front and one facing the engine.

This tank has two bolt-on type flanges with two 7/16 " NC threads in each, a bolt-on type flange on the opposite side with two 5/16 " NC threads, and two mounting holes with 5/8 " NC threads @ 16.00 " centers.

This tank has a bolt-on type flange on the front with four 7/16 " NC threaded holes, a bolt-on type flange on the back with two 5/16 " NC threaded holes, and two mounting holes with 5/8 " NC threads @ 16.00 " centers.

This tank has two bolt-on type flanges with two 7/16 " NC threads in each, a bolt-on type flange on the opposite side with two 5/16 " NC threads, and two mounting holes with 5/8 " NC threads @ 16.00 " centers.

This tank has two bolt-on type flanges with two 7/16 " NC threaded holes in each, a bolt-on type flange with two 5/16 " NC threaded holes on the opposite side, and two mounting holes with 5/8 " NC threads @ 16.00 " centers. The center of the tank has a cut-out to accommodate a PTO.

This tank has a bolt-on type flange with four 7/16 " NC threaded holes on the front side, a bolt-on type flange with two 5/16 " NC threaded holes on the backside, and mounting holes with 5/8 " NC threads @ 16.00 " centers.

One bolt-on type flange positioned on a slant with three 3/8 " N.C. threads. One bolt-on type flange on opposite side with two 5/16 " N.C. threads. Four 1/4 " N.C. threaded nuts on header. Two mounting holes with 5/8 " threads at 22.00 " centers.

Two bolt-on type flanges with two 7/16 " N.C. threads in each. One bolt-on type flange on opposite side, in center, with two 5/16 " N.C. threads. Two mounting holes with 5/8 " N.C. threads at 16.00 " centers

Two bolt-on type flanges with two 7/16 " N.C. threads in each. One bolt-on type flange with two 5/16 " N.C. threads. Two mounting holes with 5/8 " N.C. threads at 16.00 " centers. Tank dips in the middle for P.T.O

One bolt-on type flange with four 7/16 " N.C. threaded holes. One 3/8 " N.P.T. fitting. Two 1/4 " N.C. threaded nuts mounted on header flange

This tank has a 3.00 " diameter hose connection facing to ground. Note: This tank pairs with top tank #PB 708.

Top flange has 11 bolt holes drilled clearance for 5/16 " bolts. Bottom flange has 8 bolt holes drilled clearance for 5/16 " bolts. One angle mount on grille side. Various other holes for brackets, etc. NOTE: Frames are not interchangeable. Order left for driver

Same as model #PB 720 except shorter. NOTE: Frames are not interchangeable. Order left for driver

Top flange has 13 bolt holes drilled clearance for 5/16 " bolts. Bottom flange has 9 bolt holes drilled for 5/16 " bolts. One angle mount on grille side. Various other holes for brackets, etc. NOTE: Frames are not interchangeable. Order left for driver

Flanges on both ends have 13 holes, all clearance for 5/16 " bolts. One angle on each side, full length with five 1/4 " N.C. threaded nuts on each. NOTE: Frames are interchangeable.

Top and bottom flanges each have 12 holes, ten drilled clearance for 5/16 " bolts and two tapped 5/16 " N.C. One bracket on side of channel near top with two holes drilled clearance for 1/2 " bolts. Angle brackets on each side of channel with 1/4 " N.C. threaded holes. Note: frames are not interchangeable. Order left or right accordingly.

This tank has a bolt-on style flange 11.00 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange, and a filler neck hole in the top of the tank.

Inlet Outlet have a 2.50 " Connection 1/4 " NPT 4 Mounting Bosses to Attach Side Frames Identical to KW110409A except the height of the Upper Connection

This tank is a modified version of tank #PB 705. Identical, except for being narrower in width.

Top Tank This tank has a 2.50 " diameter hose connection 8.50 " from the edge of the tank to the center of the hose connection, and a 1/4 " NPT flange to accommodate a barb fitting. Bottom Tank This tank has a 2.50 " hose connection 4.00 " from the edge of the tank to the center of the hose connection, and 1/4 " NPT flange to accommodate a drain cock.

Both of these tanks are identical. Each has a 2.50 " hose connection 4.00 " from the edge of the tank to the center of the hose connection, and a 1/4 " NPT flange for either a drain cock or a vent. This tank set comes with a 1/4 " NPT drain cock, and a 1/4 " NPT x 3/8 " hose barb.

Top Tank This tank has a 2.50 " diameter hose connection 8.50 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange for a barb fitting, and two mounting pins. Bottom Tank This tank has a 2.50 " diameter hose connection 5.75 " from the edge of the tank to the center of the hose connection and pointing towards the ground, and two mounting pins. Side Frames These frames are 35.75 " long, with two indentations with holes in the center. These frames are interchangeable.

Top Tank This tank has a 2.50 " diameter hose connection 13.00 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange for a vent, and two mounting bosses at each end of the tank. Bottom Tank This tank has a 2.50 " diameter hose connection 12.87 " from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank. This set is supplied with eight 5/16 " x 4 1/2 " bolts with nuts, and a 90 degree hose barb for the vent. Note: this tank set matches brass kit #9505.

Top Tank This tank has a 2.50 " diameter hose connection 13.00 " from the edge of the tank to the center of the hose connection, a 1/4 " NPT flange for a vent, and two mounting bosses at each end of the tank. Bottom Tank This tank has a 2.50 " diameter hose connection 12.87 " from the edge of the tank to the center of the hose connection pointing towards the ground, and two mounting bosses at each end of the tank. This set is supplied with eight 5/16 " x 4.50 " bolts with nuts, and a 90 degree hose barb for the vent. Note: this tank set matches brass kit #PB 9506.

Both of these tanks are identical. Each has a 2.50 " diameter hose connection 13.87 " from the edge of the tank to the center of the hose connection, two mounting bosses on each end to attach side frames, and a 1/4 " NPT flange to accommodate a drain cock or expansion fitting. This tank set is supplied with eight 5/16 " x 4.50 " bolts with nuts, a 1/4 " NPT drain cock, and a 1/4 " NPT 90 degree hose barb.

This mounting bracket is the same as bracket #PB 7191, except that it has only two holes that are centered instead of four holes off center.

Top Tank This tank has a 2.50 " diameter hose connection, four mounting bosses to attach side frames, and a 1/4 " NPT flange for an expansion fitting. Bottom Tank This tank has a 2.50 " diameter hose connection, and four mounting bosses to attach the side frames.

This low flow tank comes complete with a check valve. There is a 1 1/4 " diameter hose connection on the driver side bent slightly up and towards the center, two 1 " diameter hose connections on 90 angle, a 3/8 " diameter hose connection on the top driver side, a 1/4 " NPT flange, and three 5/16 " NC threaded holes in the tank (one on top and two on the front). A baffle splits the tank left to right.

This top tank is the same as tank #PB 708, except that the filler neck hole and the slope of the tank is on the opposite side.

This tank has a 2.50 " diameter hose connection, and two 1/4 " NPT flanges 7.00 " and 3.00 " from the end of the tank. Note: this tank is identical to tank #PB 7081, except it has a 2.50 " hose connection instead of a 3.00 " hose connection.

This tank has a 3.00 " diameter hose connection, and two 1/4 " NPT flanges 7.00 " and 3.00 " from the end of the tank. Note: this tank is identical to tank #PB 7081, except it has a 3.00 " hose connection instead of a 2.50 " hose connection.

This tank is the same as tank #PB 709, except that there is a baffle welded inside the header 18.25 " from the driver

This tank has a 2.50 " hose connection that comes out at the bottom of the tank then bends 90 degree, a 1/4 " NPT flange for a drain cock, and a PTO cut-out in the center of the tank. Note: bolt pattern is the same as a #PB 514 or a #PB 800

This tank has a 2.50 " diameter hose connection 15.75 " from the edge of the tank to the center of the hose connection that comes straight out the bottom of the tank. Note: bolt pattern is the same as a #PB 719.

This mounting bracket has two 11/16 " diameter holes for mounting bolts @ 18.75 " centers, and a 4.00 " diameter hole to allow clearance for the hose connection. Note: matches with #PB 719 tank

This low-flow tank has one 1 1/4 " diameter hose connection on a 90 angle facing up and out to passenger side on approximately 45 angle. One 1/4 " NPT flange for a drain fitting on the deep section of the tank.

Same as #PB 7183, but without any holes threaded.

3 holes threaded 5/16 " N.C. (matches 708)

Short bars for the ends of the header.

For under headers - between our 724 7241 rails